================== Support us by subscribing our channel, thanks For modification please contact us, thanks Please visit, thanks Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
Shift+Page Up/ Page Down Zoom-in/ zoom-out in small increments
Ctrl+Page Up Zoom-in to 400%
Ctrl+Page Down Fit document into view
Ctrl+End Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it’s X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it’s Y-axis
6
Rotate 3D body clockwise around it’s Y-axis
8
Rotate 3D body clockwise around it’s X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
================== Support us by subscribing our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
==================
================== Support us by subscribing our channel, thanks For modification please contact us, thanks Please visit, thanks Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
Shift+Page Up/ Page Down Zoom-in/ zoom-out in small increments
Ctrl+Page Up Zoom-in to 400%
Ctrl+Page Down Fit document into view
Ctrl+End Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it’s X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it’s Y-axis
6
Rotate 3D body clockwise around it’s Y-axis
8
Rotate 3D body clockwise around it’s X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
================== Please subscribe our channel, thanks For modification please contact us, thanks Please visit, thanks Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
Shift+Page Up/ Page Down Zoom-in/ zoom-out in small increments
Ctrl+Page Up Zoom-in to 400%
Ctrl+Page Down Fit document into view
Ctrl+End Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it’s X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it’s Y-axis
6
Rotate 3D body clockwise around it’s Y-axis
8
Rotate 3D body clockwise around it’s X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
================== Please subscribe our channel, thanks For modification please contact us, thanks Please visit, thanks Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
Ctrl+K, T File File Commands Keyboard shortcuts File.Exit Alt+F4 File.NewFile Ctrl+N File.NewProject Ctrl+Shift+N File.NewWebSite Shift+Alt+N File.OpenFile Ctrl+O (letter ‘O’) File.OpenProject Ctrl+Shift+O (letter ‘O’) File.OpenWebSite Shift+Alt+O (letter ‘O’) File.Print Ctrl+P File.SaveAll Ctrl+Shift+S File.SaveSelectedItems Ctrl+S File.ViewinBrowser Ctrl+Shift+W Help Help Commands Keyboard shortcuts Help.AddandRemoveHelpContent Ctrl+Alt+F1 Help.F1Help F1 Help.ViewHelp Ctrl+F1 Help.WindowHelp Shift+F1 Load test Load test Command Keyboard shortcut LoadTest.JumpToCounterPane Ctrl+R, Q Other context menus Other context menus Command Keyboard shortcut OtherContextMenus.MicrosoftDataEntityDesignContext.AddNewDiagram Insert Project Project Commands Keyboard shortcuts Project.AddExistingItem Shift+Alt+A Project.AddNewItem Ctrl+Shift+A Project.ClassWizard Ctrl+Shift+X Project.Override Ctrl+Alt+Ins Project.Previewchanges Alt+; then Alt+C Project.Publishselectedfiles Alt+; then Alt+P Project.Replaceselectedfilesfromserver Alt+; then Alt+R Project and solution context menus Project and solution context menus Commands Keyboard shortcuts ProjectandSolutionContextMenus.Item.MoveDown Alt+Down Arrow ProjectandSolutionContextMenus.Item.MoveUp Alt+Up Arrow Refactor Refactor Commands Keyboard shortcuts Refactor.EncapsulateField Ctrl+R, Ctrl+E Refactor.ExtractInterface Ctrl+R, Ctrl+I Refactor.ExtractMethod Ctrl+R, Ctrl+M Refactor.RemoveParameters Ctrl+R, Ctrl+V Refactor.Rename Ctrl+R, Ctrl+R Refactor.ReorderParameters Ctrl+R, Ctrl+O (letter ‘O’) Solution Explorer Solution Explorer Commands Keyboard shortcuts SolutionExplorer.OpenFilesFilter Ctrl+[, O (letter ‘O’)
or
Ctrl+[, Ctrl+O (letter ‘O’) SolutionExplorer.PendingChangesFilter Ctrl+[, P
or
Ctrl+[, Ctrl+P SolutionExplorer.SyncWithActiveDocument Ctrl+[, S
or
Ctrl+[, Ctrl+S Team Team Commands Keyboard shortcuts Team.Git.GoToGitBranches Ctrl+0 (zero), Ctrl+N
or
Ctrl+0, N Team.Git.GoToGitChanges Ctrl+0 (zero), Ctrl+G
or
Ctrl+0, G Team.Git.GoToGitCommits Ctrl+0 (zero), Ctrl+O (letter ‘O’)
or
Ctrl+0, O Team.TeamExplorerSearch Ctrl+’ Team Foundation context menus Team Foundation context menus Commands Keyboard shortcuts TeamFoundationContextMenus.Commands.GoToBuilds Ctrl+0 (zero), Ctrl+B
or
Ctrl+0, B TeamFoundationContextMenus.Commands.GoToConnect Ctrl+0 (zero), Ctrl+C
or
Ctrl+0, C TeamFoundationContextMenus.Commands.GoToDocuments Ctrl+0 (zero), Ctrl+D
or
Ctrl+0, D TeamFoundationContextMenus.Commands.GoToHome Ctrl+0 (zero), Ctrl+H
or
Ctrl+0, H TeamFoundationContextMenus.Commands.GoToMyWork Ctrl+0 (zero), Ctrl+M
or
Ctrl+0, M TeamFoundationContextMenus.Commands.GoToPendingChanges Ctrl+0 (zero), Ctrl+P
or
Ctrl+0, P TeamFoundationContextMenus.Commands.GoToReports Ctrl+0 (zero), Ctrl+R
or
Ctrl+0, R TeamFoundationContextMenus.Commands.GoToSettings Ctrl+0 (zero), Ctrl+S
or
Ctrl+0, S TeamFoundationContextMenus.Commands.GoToWebAccess Ctrl+0 (zero), Ctrl+A
or
Ctrl+0, A TeamFoundationContextMenus.Commands.GoToWorkItems Ctrl+0 (zero), Ctrl+W
or
Ctrl+0, W Test Test Commands Keyboard shortcuts Test.UseCodedUITestBuilder Ctrl+\, Ctrl+C Test.UseExistingActionRecording Ctrl+\, Ctrl+A Test Explorer Commands Keyboard shortcuts TestExplorer.DebugAllTests Ctrl+R, Ctrl+A TestExplorer.DebugAllTestsInContext Ctrl+R, Ctrl+T TestExplorer.DebugLastRun Ctrl+R, D TestExplorer.RepeatLastRun Ctrl+R, L TestExplorer.RunAllTests Ctrl+R, A TestExplorer.RunAllTestsInContext Ctrl+R, T TestExplorer.ShowTestExplorer Ctrl+E, T LiveUnitTesting.OpenTab Ctrl+E, L Test.CodeCoverageResults Ctrl+E, C Tools Commands Keyboard shortcuts Tools.AttachtoProcess Ctrl+Alt+P Tools.CodeSnippetsManager Ctrl+K, Ctrl+B Tools.ForceGC Ctrl+Shift+Alt+F12, Ctrl+Shift+Alt+F12 View Commands Keyboard shortcuts View.AllWindows Shift+Alt+M View.ArchitectureExplorer Ctrl+\, Ctrl+R View.Backward Alt+Left Arrow (Functions differently from View.NavigateBackward in Text Editor) View.BookmarkWindow Ctrl+K, Ctrl+W View.BrowseNext Ctrl+Shift+1 View.BrowsePrevious Ctrl+Shift+2 View.CallHierarchy Ctrl+Alt+K View.ClassView Ctrl+Shift+C View.ClassViewGoToSearchCombo Ctrl+K, Ctrl+V View.CodeDefinitionWindow Ctrl+\, D
================== Support us by subscribing our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
==================
Hides the non-visual components at design time. It applies to RAD Studio Seattle and superior.
Ctrl+F / Ctrl+Q+F
Search – Find
Searches for the specified text in the active window.
Shift+Ctrl+F
Search – Find in Files
Searches for strings in files in specified folders and shows the results in the Messages View pane.
Ctrl+R / Ctrl+H / Ctrl+Q+A
Search – Replace
Searches for the specified text and replaces it with other text.
F3 / Ctrl L
Search – Search Again
Goes to the next coincidence of the string.
Ctrl+E
Search – Incremental Search
Allows you to interactively search for text.
Shift+Ctrl+Enter
Search – Find Local References (Delphi only)
Locates references in the active code file.
Ctrl+G
Search – Find Original Symbol (Delphi only)
Searches through the list of files in the Project Manager and then displays the original declaration of the symbol in question.
F6 / Ctrl+.
Search – IDE Insight
Focuses the IDE Insight search box where you can perform a filtered incremental search through the element of the IDE.
Alt+G
Search – Go to Line Number
Jumps to the specified line number of the Code Editor.
Ctrl+Alt+B
View – Debug Windows – Breakpoints
Opens the Breakpoint List pane where you can manage your breakpoints.
Ctrl+Alt+S
View – Debug Windows – Call Stack
Opens the Call Stack pane where you can see the called functions.
Ctrl+Alt+W
View – Debug Windows – Watches
Opens the Watch List pane where you can manage and watch the values of your watches.
Ctrl+Alt+L
View – Debug Windows – Local Variables
Opens the Local variables pane where you can see local variables of the the current functions while in debug mode.
Ctrl+Alt+T
View – Debug Windows – Threads
Opens the Thread Status pane with the status of all processes and threads that are executing in each application being debugged.
Ctrl+Alt+V
View – Debug Windows – Event Log
Opens the Event Log Window with messages for breakpoints, process control, threads, modules, and output that occur during a debug session.
Ctrl+Alt+M
View – Debug Windows – Modules
Opens the Modules Window pane.
Ctrl+Alt+C
View – Debug Windows – CPU Windows – Entire CPU
Opens the Entire CPU pane view during a debugging session.
Ctrl+Alt+D
View – Debug Windows – CPU Windows – Disassembly
Displays the address, the hexadecimal representation of the machine code instructions (opcodes), and the assembly instructions for each line of source code.
Ctrl+Alt+R
View – Debug Windows – CPU Windows – Registers
This pane displays the contents of the CPU registers of the 80386 and greater processors.
Ctrl+Alt+K
View – Debug Windows – CPU Windows – Stack
Displays the raw values contained in the program stack.
Ctrl+Alt+1
View – Debug Windows – CPU Windows – Memory1
Displays the raw values contained in addressable areas of your program. There are four different Memory views in order to view four distinct areas in memory at the same time.
Ctrl+Alt+2
View – Debug Windows – CPU Windows – Memory2
Displays the raw values contained in addressable areas of your program. There are four different Memory views in order to view four distinct areas in memory at the same time.
Ctrl+Alt+3
View – Debug Windows – CPU Windows – Memory3
Displays the raw values contained in addressable areas of your program. There are four different Memory views in order to view four distinct areas in memory at the same time.
Ctrl+Alt+4
View – Debug Windows – CPU Windows – Memory4
Displays the raw values contained in addressable areas of your program. There are four different Memory views in order to view four distinct areas in memory at the same time.
Ctrl+Alt+F
View – Debug Windows – FPU
Displays the contents of the Floating-point Unit and SSE registers in the CPU.
Ctrl+Alt+O
View – Debug Windows – CodeGuard Log
Provides runtime debugging for C++ applications being developed.
Shift+Ctrl+H
View – Help Insight
Displays a hint containing information about the symbol at the cursor.
Ctrl+F12
View – Units
Displays the Search for Units dialog box with all the units in the current project.
Shift+F12
View – Forms
Displays the Search for forms dialog box with all the forms in the current project.
F12
View – Toggle Form/Unit
Changes the view between the Form and the corresponding code unit.
Shift+Alt+F11
View – Structure
Opens or focuses on the Structure pane.
F11
View – Object Inspector
Opens or focus on the Object Inspector.
Alt+0
View – Window List
Displays a list of open windows.
Ctrl+Alt+P
View – Tool Palette
Opens the Tool Palette pane.
Ctrl+Alt+F11
View – Projects Window
Opens the Project Manager pane.
Shift+Ctrl+E
Refactor – Rename (Delphi only)
Opens the Rename <symbol- to rename an identifier and all references to this identifier.
Shift+Ctrl+V
Refactor – Declare Variable (Delphi only)
Opens the Declare Variable window to declare a local variable in a procedure.
Shift+Ctrl+D
Refactor – Declare Field (Delphi only)
Opens the Declare New Field window to declare a type in the code.
Shift+Ctrl+M
Refactor – Extract Method (Delphi only)
Turns a selected code fragment into a method.
Shift+Ctrl+L
Refactor – Extract Resource String (Delphi only)
Converts the string currently selected in the Code Editor to a resource string.
Shift+Ctrl+X
Refactor – Change Params (Delphi only)
Adds, edits, removes, and rearranges the parameters of a method.
Shift+Ctrl+A
Refactor – Find Unit (Delphi only)
Opens the Find Unit window to locate units and add them to the uses clause of your Delphi code file.
Shift+F11
Project – Add to Project
Adds another source file to the current project.
Alt+F9
Project – Build <file_name-.cpp (C++ only)
Rebuilds all files in your current project regardless of whether they have changed.
Ctrl+F9
Project – Make <project_name- (C++) Project – Compile <project_name- (Delphi)
Compile (for Delphi) or Make (for C++) compiles only those files that have changed since the last build, as well as any files that depend on them.
Shift+F9
Project – Build <project_name-
Rebuilds all files in your current project regardless of whether they have changed.
Shift+Ctrl+Alt+F9
Project – Deploy <project_name-
Deploys the project.
Shift+Ctrl+F11
Project – Options
Opens the Project Options window for the selected project.
F9
Run – Run
Compiles any changed source code and, if the compile is successful, executes your application, allowing you to use and test the application with the debugger built into the IDE.
Shift+Ctrl+F9
Run – Run Without Debugging
Compiles any changed source code, and if the compile is successful, executes your application without invoking the debugger built into the IDE.
F8
Run – Step Over
Tells the debugger to execute the next line of code. If the line contains a function, Step Over executes the function and then stops at the first line after the function.
F7
Run – Trace Into
Tells the debugger to execute the next line of code. If the line contains a function, Trace Into executes the function and then stops at the first line of code inside the function.
Shift+F7
Run – Trace to Next Source Line
Executes a single source line.
F4
Run – Run to Cursor
Executes the current program and stops at the cursor location.
Shift+F8
Run – Run Until Return
Executes the current program and stops when the function returns.
Ctrl+F2
Run – Program Reset
Terminates the application or process that is currently under the control of the debugger.
Ctrl+F7
Run – Evaluate/Modify
Evaluates or changes the value of an existing expression or property.
Ctrl+F5
Run – Add Watch
Adds a watch or changes the properties of an existing watch. The watch appears in the Watch List.
Alt+End
Window – Next Window
When the windows are floating, it toggles between windows.
Ctrl+R
Refactorings | right-click on the Refactorings pane | Apply Refactoring
Applies the refactoring definition that appears in the Refactorings pane.
Ctrl+Z
Refactorings | right-click on the Refactorings pane | Undo/Redo
Undoes the refactoring.
Del
Refactorings | right-click on the Refactorings pane | Remove Find | right-click on the C++ Find References pane | Remove
Removes the refactoring definition of the Refactorings pane.
Ctrl+A
To-Do List | right-click on the To-Do List pane | Add
Opens the Add To-Do Item where you can introduce the new task to appear in the To-Do List pane.
F2
To-Do List | right-click on the To-Do List pane | Add
Opens the Add To-Do Item to edit the selected task.
Ctrl+C
To-Do List | right-click on the To-Do List pane | Copy As – Text
Copies the content of the To-Do List as plain text.
Ctrl+T
To-Do List | right-click on the To-Do List pane | Copy As – HTML Table
Copies the content of the To-Do List as an HTML table.
Ctrl+V
Messages | right-click on the Messages View pane | View Source
Opens the source file in a new tab in the Code Editor.
Ctrl+S
Messages | right-click on the Messages View pane | Edit Source
Highlights in red the code line related with the error that appears in the Messages pane. It opens the source file if necessary.
Click+Shift
Tool Palette
Targets the component in the Tool Palette to make the selection repetitive. Click the component again to cancel the selection.
Esc
Tool Palette
Displays all the categories of the Tool Palette.
Ctrl+Arrow keys
Form Designer
Moves the selected component.
Shift+Ctrl+Arrow
Form Designer
Moves the component faster.
Tab / Arrow Key
Form Designer
Switches between components.
Shift+Arrow Key
Form Designer
Changes the size of the component.
Esc
Form Designer
Selects the parent component.
Ctrl+Tab
Form Designer
Moves forward on the Editing tabs.
Shift+Ctrl+Tab
Form Designer
Moves backwards on the Editing tabs.
Ctrl+Tab
Object Inspector
Switches between the Properties tab and the Events tab.
Tab
Object Inspector
Changes the focus between the two columns of the two tabs. In the Properties name column you can navigate typing the name of the property.
Ctrl+Enter
Object Inspector
Allows selecting an option from a combo box in the values column of the two tabs. On the Events tab, it generates the event handler and the focus changes to the code editor where it appears highlighted.
Ctrl+Alt+Down Arrow
Object Inspector
Shows the list of values for the selected field.
+/-
Object Inspector
Expands or contracts the tree node for the property.
Ctrl+Down Arrow
Object Inspector
Shows all the elements of the combo box.
F12
Object Inspector
Switches between the designer tab and the code editor tab.
Shift+Alt+F11
Object Inspector
Focuses on the Structure pane.
Alt+F4
Closes RAD Studio.
Ctrl+Num +
Code Editor Context Menu | Increase Font Size
Increases the font size of the Code Editor.
Ctrl+Num –
Code Editor Context Menu | Decrease Font Size
Decreases the font size of the Code Editor.
Shift+Ctrl+N
Code Editor Context Menu | Find – Find Definition
Searches the entire project for definitions of the selected identifier.
Shift+Ctrl+Enter
Code Editor Context Menu | Find – Find References
Searches the entire active project for references to a selected identifier.
Shift+Ctrl+B
Code Editor Context Menu | Find – Show Base Types
Searches the entire project for base types of the selected class or method.
Shift+Ctrl+Q
Code Editor Context Menu | Find – Show Derived Types
Searches the entire project for derived types of the selected class or method. Code Editor Keyboard Shortcuts
The following table lists the Default Mapping keyboard shortcuts for the Code Editor.
Note: Keyboard shortcuts that include the Ctrl+Alt key combination are disabled when the Use Ctrl+Alt Keys option is unchecked on the Tools - Options - Editor Options - Key Mappings page.
Shortcut Action
Alt+[ / Ctrl+Q+[
Finds the forward matching delimiter.
Alt+] / Ctrl+Q+]
Finds the backward matching delimiter.
Down Arrow
Moves down one line.
Up Arrow
Moves up one line.
Right Arrow
Moves the cursor one character to the right.
Left Arrow
Moves the cursor one character to the left.
Spacebar
Inserts a space.
Tab
Inserts a tab.
End
Moves to the end of the current line.
Enter
Inserts the carriage return.
Ins
Toggles between the insert and overwrite modes.
Backspace
Deletes a character to the left of the cursor.
Del
Deletes a character to the right of the cursor.
F1
Displays a help topic describing:
A pointed reserved word, directive, or C++ keyword.
A pointed identifier (or selected qualified identifier) corresponding to a name of a procedure, function, constant, property, variable, field, type, program, unit, library, or package described in installed CHM help files.
The Code Editor.
F5
Toggles between adding and removing a breakpoint in the current line.
Page Down
Moves down one page.
Page Up
Moves up one page.
Alt+Backspace / Ctrl + Z
Undo.
Alt+F7
Go to previous error or message in Messages View.
Alt+F8
Go to next error / message in Messages View.
Alt+F10 / Shift+F10
Displays the Code Editor Context Menu.
Alt+Page Down
Goes to the next tab.
Alt+Page Up
Goes to the previous tab.
Alt+Right Arrow
Goes forward after Alt+Left Arrow operation.
Alt+Shift+Backspace
Redo.
Alt+Shift+Down Arrow
Moves the cursor down one line and selects the column from the left of the starting cursor position.
Alt+Shift+End
Selects the column from the cursor position to the end of the current line.
Alt+Shift+Home
Selects the column from the cursor position to the start of the current line.
Alt+Shift+Left Arrow
Selects the column to the left of the cursor.
Alt+Shift+Page Down
Moves the cursor down one line and selects the column from the right of the starting cursor position.
Alt+Shift+Page Up
Moves the cursor up one screen and selects the column from the left of the starting cursor position.
Alt+Shift+Right Arrow
Selects the column to the right of the cursor.
Alt+Shift+Up Arrow
Moves the cursor up one line and selects the column from the left of the starting cursor position.
Alt+Up Arrow / Ctrl+Right Click
Goes to declaration.
Alt+Left Arrow
Goes back after Alt+Up Arrow or Ctrl+Click (go to declaration) operation.
Click+Alt+mousemove
Selects column-oriented blocks.
Ctrl+/
Adds or removes // to each line in the selected code block to comment the code.
Ctrl+Spacebar
Displays the Code Completion pop-up window or the Argument Value List.
Ctrl+0 (or 1-9) / Ctrl+Q+0 (or 1-9)
Goes to the corresponding bookmark.
Ctrl+K+1 (or 2-9)
Sets the bookmark.
Shift+Ctrl+1 (or 2-9)
Removes the bookmark.
Ctrl+Alt+Down Arrow
Goes to the first line of the following method in the file/class.
Ctrl+Alt+End
Goes to the last method in the file/class.
Ctrl+Alt+F12
Displays a drop down list of open files.
Ctrl+Alt+Home
Goes to the first method in the file/class.
Ctrl+Alt+N & Ctrl+Alt+U
Opens the Used Units of the Navigation Toolbar; displays a list of all the units that the current unit uses.
Ctrl+Alt+N & Ctrl+Alt+S
Opens the File Sections of the Navigation Toolbar; displays a list of sections in the file.
Ctrl+Alt+N & Ctrl+Alt+T
Opens the Types combo box of the Navigation Toolbar; displays the names of all the declared types in the current unit.
Ctrl+Alt+N & Ctrl+Alt+P
Opens the Methods combo box of the Navigation Toolbar; displays the names of all the procedures and functions of the current unit.
Ctrl+Alt+N & Ctrl+Alt+F
Opens the Project Symbol Search of the Navigation Toolbar.
Ctrl+Alt+Q & Ctrl+Alt+G
Swaps the last stack bookmark placed and the cursor location.
Ctrl+Alt+Shift+End
Selects the column from the cursor position to the end of the current file.
Ctrl+Alt+Shift+Home
Selects the column from the cursor position to the start of the current file.
Ctrl+Alt+Shift+Left Arrow
Selects the column to the left of the cursor.
Ctrl+Alt+Shift+P
Synchronizes the interface and implementation copies of your procedure and function prototypes.
Ctrl+Alt+Shift+Page Down
Selects the column from the cursor position to the top of the screen.
Ctrl+Alt+Shift+Page Up
Selects the column from the cursor position to the bottom of the screen.
Ctrl+Alt+Shift+Right Arrow
Selects the column to the right of the cursor.
Ctrl+Alt+Mouse Scroll
Hops between methods in a file/class.
Ctrl+Alt+Up Arrow
Hops to the first line of the current method or the first line of the preceding method in the file/class.
Ctrl+Backspace
Deletes the word to the left of the cursor (deletes characters to the preceding space).
Ctrl+C / Ctrl+Ins
Copies the selection to the clipboard.
Ctrl+V / Shift+Ins
Pastes a selection form the clipboard.
Ctrl+X/ Shift+Del
Cuts a selection to the clipboard.
Ctrl+Del
Deletes a currently selected block.
Ctrl+Down Arrow
Scrolls down one line.
Ctrl+End / Crtl+Q+C
Moves to the end of a file.
Ctrl+Enter / Ctrl+O+A
Opens file at cursor.
Ctrl+Home / Ctrl+Q+R
Moves the cursor to the top of a file.
Ctrl+Q+S / Home
Moves the cursor to the beginning of a line.
Ctrl+F4
Closes the current editor page.
Ctrl+F10, F10
Gives focus to Delphi’s main menu instead of the cursor.
Ctrl+I / Ctrl+K+I / Shift+Ctrl+I / Tab
Inserts a tab character.
Ctrl+J
Displays the Code template completion pop-up menu.
Ctrl+K & Ctrl+G
Drops a stack bookmark in the current cursor location.
Ctrl+K+B
Marks the beginning of a block.
Ctrl+K+C
Copies the selected block.
Ctrl+K+E
Lowercases the current word.
Ctrl+K+F
Uppercases the current word.
Ctrl+K+H
Toggles a block selection.
Ctrl+K+K
Marks the end of a block.
Ctrl+K+N
Changes a selected block to uppercase.
Ctrl+K+O
Changes a selected block to lowercase.
Ctrl+K+P
Opens the Print Selection dialog box to print the selected block.
Ctrl+K+R
Opens the Read File as Block dialog box.
Ctrl+K+T
Marks a word as a block.
Ctrl+K+U / Shift+Ctrl+U / Shift+Tab
Outdents a selected line or block.
Ctrl+K+W
Opens the Write Block to File dialog box.
Ctrl+K+Y
Deletes a selected block.
Ctrl+Left Arrow
Moves the cursor one word to the left.
Ctrl+Right Arrow
Moves the cursor one word to the right.
Ctrl+N
Inserts a new line.
Ctrl+O+C
Turns on column blocking.
Ctrl+O+K
Turns off column blocking.
Ctrl+O+L
Turns on line blocking mode.
Ctrl+O+O
Inserts compiler options.
Ctrl+O+U
Toggles case of a selected block.
Ctrl+P
Causes the next character to be interpreted as an ASCII sequence.
Ctrl+Q & Ctrl+G
Picks up the last stack bookmark moving the cursor to such location.
Ctrl+Q+B
Moves the cursor to the beginning of a block.
Ctrl+Q+D / End
Moves the cursor to the end of a line.
Ctrl+Q+K
Moves the cursor to the end of a block.
Ctrl+PgDn / Ctrl+Q+X
Moves to the bottom of a screen.
Ctrl+PgUp / Ctrl+Q+E
Moves to the top of a screen.
Ctrl+Q+T
Shifts the Code Editor, moving the current line to the top of the editor window.
Ctrl+W
Selects the identifier under the cursor and then expands the selection to larger syntactic groups.
Shift+Ctrl+C
Invokes class completion for the class declaration in which the cursor is positioned.
Shift+Ctrl+B
Displays the buffer list.
Shift+Ctrl+Down Arrow
Jumps between declaration and implementation sections in the same unit.
Shift+Ctrl+J
Enter or exits the SyncEdit mode.
Shift+Ctrl+K+A
Expands all blocks of code.
Shift+Ctrl+K+C
Collapses all classes.
Shift+Ctrl+K+E
Collapses a block of code.
Shift+Ctrl+K+G
Collapses Initializes/finalize and interface/implementation.
Shift+Ctrl+K+M
Collapses all methods.
Shift+Ctrl+K+N
Collapses a namespace/Unit.
Shift+Ctrl+K+O
Toggles between enabling and disabling Code Folding.
Shift+Ctrl+K+P
Collapses nested procedures.
Shift+Ctrl+K+T
Toggles the current block between collapsed and expanded.
Shift+Ctrl+K+U
Expands a block of code.
Shift+Ctrl+F4
Closes all the editor pages except the main one.
Shift+Ctrl+End
Selects from the cursor position to the end of the current file.
Shift+Ctrl+G
Inserts a new Globally Unique Identifier (GUID).
Shift+Ctrl+Home
Selects from the cursor position to the start of the current file.
Shift+Ctrl+I
Indents a selected block.
Shift+Ctrl+Left Arrow
Selects the word to the left of the cursor.
Shift+Ctrl+P
Plays a recorded keystroke macro.
Shift+Ctrl+PgDn
Selects from the cursor position to the bottom of the screen.
Shift+Ctrl+PgUp
Selects from the cursor position to the top of the screen.
Shift+Ctrl+R
Toggles between starting and stopping the recording of a keystroke macro.
Shift+Ctrl+Right Arrow
Selects the word to the right of the cursor.
Shift+Ctrl+Spacebar
Displays the Code Parameters pop-up window.
Shift+Ctrl+T
Opens the Add or Edit To-Do Item dialog box.
Shift+Ctrl+Tab
Moves to the previous code page (or file).
Shift+Ctrl+Up Arrow
Jumps between declaration and implementation.
Shift+Ctrl+Y / Ctrl+Q+Y
Deletes to the end of a line.
Ctrl+T
Deletes a word to the right (deletes characters to the next space) of the cursor.
Ctrl+O+G
Opens the Go to Line Number dialog box.
Ctrl+Tab
Moves to the next code page (or file).
Ctrl+Up Arrow
Scrolls up one line.
Ctrl+Y
Deletes the current line.
Ctrl+S
Saves the current file. If the file is unsaved, it opens the Save < file_name – As dialog box.
Shift+Alt+Arrow
Selects column-oriented blocks.
Shift+Backspace
Deletes the character to the left of the cursor.
Shift+Down Arrow
Moves the cursor down one line and selects from the right of the starting cursor position.
Shift+End
Selects from the cursor position to the end of the current line.
Shift+Enter
Inserts a new line with a carriage return.
Shift+Home
Selects from the cursor position to the start of the current line.
Shift+Left Arrow
Selects the character to the left of the cursor.
Shift+PgDn
Moves the cursor down one line and selects from the right of the starting cursor position.
Shift+PgUp
Moves the cursor up one screen and selects from the left of the starting cursor position.
Shift+Right Arrow
Selects the character to the right of the cursor.
Shift+Space
Inserts a blank space.
Shift+Tab
Moves the cursor to the left one tab position.
Shift+Up Arrow
Moves the cursor up one line and selects from the left of the starting cursor position.
================== Support us by subscribing our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks…
==================
Fixing Path Error in Keil nRF52840 ANT sync transmitter Easy
PCB Editor Only Shortcuts
Shift+R Cycle through three routing modes
Shift+E Toggle electrical grid on/off
Shift+B Build Query
Shift+Page Up/ Page Down Zoom-in/ zoom-out in small increments
Ctrl+Page Up Zoom-in to 400%
Ctrl+Page Down Fit document into view
Ctrl+End Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it’s X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it’s Y-axis
6
Rotate 3D body clockwise around it’s Y-axis
8
Rotate 3D body clockwise around it’s X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
================== Support us by subscribing our channel, thanks For modification please contact us, thanks Please visit, thanks Entertainment for Engineer’s break time
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢 Please share a coffee with me, thanks… ==================